Professional vocational teaching equipment manufacturer in Guangzhou, Chinasales01@star-brain.com · www.star-brain.com
Environmental & Water Quality Testing

Digital Water Multi-Parameter Tester

A four-wavelength photometric tester for ammonia nitrogen, COD and total phosphorus, with built-in calibration curves and GLP data storage.

Digital Water Multi-Parameter Tester

Product Identification

BrandStarBrain
ModelSTBAT-401
Country of originChina
Country of manufacturingChina

Product image is taken from the original StarBrain specification document. Final appearance and component arrangement are subject to confirmed specifications.

Product Overview

4 LED wavelengthsCOD / NH3-N / TPIP65Smart-Read

Main feature

  • Built-in four LED light sources of 420nm, 470nm, 620nm and 700nm, long life and high precision.
  • Support single-point and multi-point calibration, allowing users to edit calibration curves.
  • Supports two measurement methods: absorbance and concentration.
  • Support two reading modes: Smart-Read function (smart judging end point), Cont-Read function (continuous measurement).
  • Each test item can store 200 sets of measurement results, conform to the GLP specification, and support data review, deletion and printing.
  • IP65 protection grade, good waterproof and dustproof performance.
  • Support firmware upgrade, support for factory reset, and allow for function expansion and application expansion.

Specification

  • Wavelength: 420nm; 470nm; 620nm; 700nm.

Measuring range

  • Ammonia nitrogen: (0.000 ~ 4.000) mg / L, can be extended to (0.000 ~ 300.00) mg / L.
  • Low concentration COD: (0.0~150.0)mg/L.
  • High concentration COD: (150~1500)mg/L.
  • Total phosphorus: (0.000~1.000)mg/L, can be extended to (0.000~25.00)mg/L.

Basic error

  • Ammonia nitrogen: ±10%.
  • Low concentration COD: ±8%.
  • High concentration COD: ±8%.
  • Total phosphorus: ±10%.

Repeatability

  • Ammonia nitrogen: ±3%.
  • Low concentration COD: ±3%.
  • High concentration COD: ±3%.
  • Total phosphorus: ±3%.

Stability

  • Ammonia nitrogen: The change of ammonia nitrogen concentration within 20min should be less than 0.200mg/L.
  • Low concentration COD: The change of COD value within 20min should be less than 6mg/L.
  • High concentration COD: The change of COD value within 20min should be less than 6mg/L.
  • Total phosphorus: The change of total phosphorus concentration within 20min should be less than 0.050mg/L.
  • Power Supply: AA Battery or 5V DC 1A.

More in Environmental & Water Quality Testing